• Thanks for stopping by. Logging in to a registered account will remove all generic ads. Please reach out with any questions or concerns.

How Many Dollars and How Many People for DND

Kirkhill

Puggled and Wabbit Scot.
Subscriber
Donor
Reaction score
8,306
Points
1,160
We don't have 24 Billion to spend - at least not on new equipment.

Core Responsibilities and Internal Services2019–20 Expenditures2020–21 Expenditures2021–22 Forecast spending2022–23 budgetary spending (as indicated in Main Estimates)2022–23 Planned spending2023–24 Planned spending2024–25 Planned spending
Operations1,044,514,7721,028,857,6841,112,553,924794,902,544794,902,544806,647,190814,971,524
Ready Forces9,875,229,20911,719,160,12010,292,348,93410,453,990,70910,453,990,70910,458,121,83110,637,852,995
Defence Team3,365,827,1434,057,640,2303,859,083,0523,738,769,2073,738,769,2073,752,774,8543,798,539,154
Future Force Design758,767,328836,173,606754,558,732820,654,966820,654,966818,760,419821,095,511
Procurement of Capabilities3,298,055,5604,119,915,7134,195,092,4774,792,013,0074,792,013,0075,127,882,9453,894,787,550
Sustainable Bases, Information Technology Systems and Infrastructure3,651,639,0014,185,750,6293,988,447,4234,129,651,4994,129,651,4994,105,845,1514,107,345,584
Subtotal21,994,033,01325,947,497,98224,202,084,54224,729,981,93224,729,981,93225,070,032,39024,074,592,318
Internal Services845,405,324879,539,855993,206,2271,220,365,6241,220,365,624875,321,829888,996,604
Total22,839,438,33726,827,037,83725,195,290,76925,950,347,55625,950,347,55625,945,354,21924,963,588,922

Core Responsibilities and Internal Services2019-20 actual full-time equivalents2020-21 actual full-time equivalents2021-22 forecast full-time equivalents2022–23 planned full-time equivalents2023–24 planned full-time equivalents2024–25 planned full-time equivalents
Operations2,6472,1563,0782,1442,1452,151
Ready Forces45,79745,43146,71645,92045,95746,052
Defence Team20,40718,90218,05919,12719,12319,166
Future Force Design1,9301,8832,0861,9141,8871,885
Procurement of Capabilities2,4272,5252,8432,4292,4192,427
Sustainable Bases, Information Technology Systems and Infrastructure15,97415,944 16,49315,52615,45515,503
Subtotal89,18286,84189,27587,06086,98687,184
Internal Services4,0704,3424,4704,2844,2774,296
Total93,25291,18393,74591,34491,26391,480

-2022–232023–242024–25
Primary Reserve29,25029,55030,000
Cadet Organization Administration and Training Service7,2507,5008,000
Canadian Rangers5,6805,6805,680




Presumably missiles and ammunition come out of the Operating Budget and not the Capital Budget
Just like presumably spares come out of the Operating Budget and not the Capital Budget

But both ammunition and spares are carried by the Capital Budget of any new project - for a limited time.
How long is that limited time stretched by people slowing the use rate when they can so that replacements are procured later if at all?
  • The largest portion of the budget is allocated to Personnel (37%), Operating (36%) and Capital (17%)

  • DND’s Main Estimates 2019-20 are $21.9 billion, comprised of various votes as well as statutory funding (mainly comprised of funding related to employee benefit plans totalling approximately $1.4 billion). The votes are:
    • Vote 1 – Operating Costs ($15.8 billion);
    • Vote 5 – Capital ($3.8 billion);
    • Vote 10 – Grants and Contributions ($200 million);
    • Vote 15 – Payments in respect of the long-term disability and life insurance plan for members of the Canadian Forces ($400 million);
    • Vote 20 – Protecting Canada’s National Security ($2 million);
    • Vote 25 – Renewing Canada’s Middle East Strategy ($199 million);
    • Vote 30 – Supporting Veterans as They Transition to Post-Service Life ($19 million); and,
    • Vote 35 – Reinforcing Canadaʼs Support for Ukraine ($34 million).
 
The way DND, or well the GoC explains the CAF budget is all very odd to me.
For an allegedly representative democratic constitutional monarchy, it isn't very transparent.
Compared to what DoD has to report to Congress down here.

$4.8B Projected for 22-23 on Capital Equipment is criminal for a G7 Nation like Canada, and 23-24 at 5.1 isn't much better.
 
I mean almost 1/4 of Q4 was dedicated to Sexual Harassment Lawsuit payments…
AD0AB323-7613-4DBB-8E2E-6DF7C5E720D7.png
 
The National Procurement allocations are atrocious and the CAF knows it but can’t seem to fix it either internally or externally.

There keeps being a focus on “readiness” perhaps best understood to be operational readiness but I am not convinced people understand how the underfunded National Procurement and lack of modernization both equipment and structures are limiting our operational and structural readiness.

Even the US Army has consistently recognized it can’t do operational readiness and modernization both as Pri 1 yet the CAF and DND think we can.
 
@dapaterson . On this general topic, there's a recent Wavell Room article here: The Problem of Resource Account Budgeting (RAB) for the Army.

How much similarity is there between the Brit system and ours. My limited understanding seems to equate these roughly to Vote 1 and 5 spending.

Am I right in thinking that with our staffing shortfalls that we are now also underspending Vote 1 as well as Vote 5?

:unsure:
 
I did quick review of the article, and need to read it in more detail.

My initial impression is that (a) accounting is complex, and needs competent individuals to perform it; (b) leaders need good communicators to explain what things do and do not mean; (c) MBAs can be terrible in the public sector, as the outputs of the public sector do not necessarily align with business objectives; and (d) blaming accounting for a military's lack of readiness is scapegoating, since responsibility for a lack of readiness ultimately lies with commanders who made decisions, usually to protect their petty little empires at the expense of the institution.

re: vote 1 vs vote 5: It's complex. Projects can be vote 1 or vote 5. A vote 1 project can underspend by tens of millions - for example, if a Foreign Military Sales agreement delivers a dozen AMRAAM missiles in mid April instead of late March, that's $18M (CAD) in vote 1 that suddenly slipped from one FY to another.

That said, stupidly aggressive project schedules do no one any favours - well, no one but the operator who promised timings that were unachievable, but that wouldn't materialize until after they were posted. (APS is the bane of good management, but that's another rant for another day.)
 
The National Procurement allocations are atrocious and the CAF knows it but can’t seem to fix it either internally or externally.

There keeps being a focus on “readiness” perhaps best understood to be operational readiness but I am not convinced people understand how the underfunded National Procurement and lack of modernization both equipment and structures are limiting our operational and structural readiness.

Even the US Army has consistently recognized it can’t do operational readiness and modernization both as Pri 1 yet the CAF and DND think we can.

ADM Mat lacks the staff to properly prosecute NP. Throwing them more NP without growing their workforce won't work.

Most NP activity is multi year / outyear, so it lacks the heat and light to make proper fixes. Today's panic normally outweighs strategic planning; the CAF promotes sub-tactical individuals to positions of senior responsibility, and suffers as a result.
 
One of the greatest issues I see day in and day out is the lack of procurement expertise in our uniformed ranks, thus relying on a civilian workforce (both DND and contracted personnel) who lack the operational experience to understand what they are doing. PDs get so wrapped up in getting the shiny new toy that they whitewash anything that may slow down the process. We need informed senior leaders who make decisions based on the entire requirements of a project, and not rely of project staff descoping anything that poses a problem. On the RCAF side, we have a habit of funding and procuring the airframes, the spares, maybe the ammunition stores, possibly the training environment. We often make things like support equipment, infrastructure, IT requirements, and personnel outside the scope, or put them in later phases because either funding or planning in lacking. I would love to see the day that the Commander, forced to make a choice due to funding constraints, says procure less airframes, and make sure everything else is in place to maximize the capability.
 
ADM Mat lacks the staff to properly prosecute NP. Throwing them more NP without growing their workforce won't work.

Most NP activity is multi year / outyear, so it lacks the heat and light to make proper fixes. Today's panic normally outweighs strategic planning; the CAF promotes sub-tactical individuals to positions of senior responsibility, and suffers as a result.
Don't worry we are also 'improving processes' to 'streamline things'. In reality that seems to mean it takes more work to acheive the same effect. So it's not even just HR shortages it's things actually take more LOE individually.

Bit of a simple example, on every NP buy we have to indicate if it's a GBA+ or Indigenous buy. It's a one page form, but still take a few minutes to process and get the couple of signatures to put down that it 'doesn't apply' when you are buying spare parts for existing equipment. But that is required for every single buy, so probably thousands of them are done every year for no actual purpose. A top level exemption would have sorted that.

Or now every procurement over 20M requires a 'supply business case analysis (SBCA)', which involves DND, ISED PSPC and others. It's a new process that is just being figured out, but there is no off ramp for cases where there is a simple path forward, or consideration that 20M for through life costing is really quite low. That one adds potentially years onto a procurement, and also impacted by the lack of HR within DND, ISED and PSPC to actually support it.

ANd add to that the amount of time spent figuring out work arounds for immediate issues is being done by the same person supposed to be doing projects cumulatively we are probably a decade behind, with hundreds of obsolete individual items as well that all need some investigation.

On the Navy side we're also adding in certification with class societies, which is also bringing in a lot of net new work for the same group of people.
 
We need a C.D. Howe type person to reorient our system from process to result writ large.

In terms of the staffing within Adm (Mat) on the military side, it would be interesting to pull up the VCDS staffing priorities and see where the military positions in Adm (Mat) fall.
Its one of those items that in terms of immediate tactical/operational readiness for tomorrow might make sense to deprioritize for personnel in favour of tactical units but that decision comes at the expense of strategic and structural readiness in 2-5 years.
 
One of the greatest issues I see day in and day out is the lack of procurement expertise in our uniformed ranks, thus relying on a civilian workforce (both DND and contracted personnel) who lack the operational experience to understand what they are doing. PDs get so wrapped up in getting the shiny new toy that they whitewash anything that may slow down the process. We need informed senior leaders who make decisions based on the entire requirements of a project, and not rely of project staff descoping anything that poses a problem. On the RCAF side, we have a habit of funding and procuring the airframes, the spares, maybe the ammunition stores, possibly the training environment. We often make things like support equipment, infrastructure, IT requirements, and personnel outside the scope, or put them in later phases because either funding or planning in lacking. I would love to see the day that the Commander, forced to make a choice due to funding constraints, says procure less airframes, and make sure everything else is in place to maximize the capability.

Perhaps that is a place that the Regs could reach out more to the Reserve community for expertise?

Uniformed members, in my understanding, aren't given many professional opportunities to develop negotiating skills. Not surprising in an organization where the entire organization is built on command authority. Negotiation is not a primary requirement.

Conversely many members of the Reserves negotiate supply contracts on a daily basis. And some of them even understand some of the needs of the soldier. Or at least understand the environment well enough to be able to take instruction from those with the needs.

A civvy fleet manager that is also a Captain in the Air Force Reserve might be a good candidate for a Project Manager or Director.
 
Don't worry we are also 'improving processes' to 'streamline things'. In reality that seems to mean it takes more work to acheive the same effect. So it's not even just HR shortages it's things actually take more LOE individually.

Bit of a simple example, on every NP buy we have to indicate if it's a GBA+ or Indigenous buy. It's a one page form, but still take a few minutes to process and get the couple of signatures to put down that it 'doesn't apply' when you are buying spare parts for existing equipment. But that is required for every single buy, so probably thousands of them are done every year for no actual purpose. A top level exemption would have sorted that.

Or now every procurement over 20M requires a 'supply business case analysis (SBCA)', which involves DND, ISED PSPC and others. It's a new process that is just being figured out, but there is no off ramp for cases where there is a simple path forward, or consideration that 20M for through life costing is really quite low. That one adds potentially years onto a procurement, and also impacted by the lack of HR within DND, ISED and PSPC to actually support it.

ANd add to that the amount of time spent figuring out work arounds for immediate issues is being done by the same person supposed to be doing projects cumulatively we are probably a decade behind, with hundreds of obsolete individual items as well that all need some investigation.

On the Navy side we're also adding in certification with class societies, which is also bringing in a lot of net new work for the same group of people.

As Project Manager I have had up to 15 departmental signature blocks I have had to get filled in order to advance a project. If it is not GBA+ and Indigenous participation, if it is not Carbon and Energy, or Industrial offsets, it will be something else. That is the art of being an effective Project Manager - managing the maze.
 
As Project Manager I have had up to 15 departmental signature blocks I have had to get filled in order to advance a project. If it is not GBA+ and Indigenous participation, if it is not Carbon and Energy, or Industrial offsets, it will be something else. That is the art of being an effective Project Manager - managing the maze.
These aren't projects; this is buying spares. Imagine o-rings, POL, valves, motors, etc etc etc.

All those are RFPs. All RFPs require a GBA+ review.

No issue with doing that for projects, but when hundreds of us spend an extra few hours a year doing that on routine procurements with zero added value. GBA+ can be genuinely useful for replacement projects, or reviewing current equipment for suitability of the end user (especially for things like sizing of clothing) but is totally irrelevant to buying (sometimes literal) nuts and bolts. This particular one is a form that has to get filled out every single time and added as part of the procurement documentation, where you could avoid it entirely by selectively employing the policy better.

Within ADM(Mat) it's the same people working on projects that are also doing in service support, and managing NP projects is far more LOE intensive than capitol projects due to the differences in how the finances work.
 
These aren't projects; this is buying spares. Imagine o-rings, POL, valves, motors, etc etc etc.

All those are RFPs. All RFPs require a GBA+ review.

No issue with doing that for projects, but when hundreds of us spend an extra few hours a year doing that on routine procurements with zero added value. GBA+ can be genuinely useful for replacement projects, or reviewing current equipment for suitability of the end user (especially for things like sizing of clothing) but is totally irrelevant to buying (sometimes literal) nuts and bolts. This particular one is a form that has to get filled out every single time and added as part of the procurement documentation, where you could avoid it entirely by selectively employing the policy better.

Within ADM(Mat) it's the same people working on projects that are also doing in service support, and managing NP projects is far more LOE intensive than capitol projects due to the differences in how the finances work.

The nausea that is required for simple unit level procurement is absolutely ridiculous. And completely out in left field.

I can't imagine how silly it is for higher level stuff.
 
These aren't projects; this is buying spares. Imagine o-rings, POL, valves, motors, etc etc etc.

All those are RFPs. All RFPs require a GBA+ review.

No issue with doing that for projects, but when hundreds of us spend an extra few hours a year doing that on routine procurements with zero added value. GBA+ can be genuinely useful for replacement projects, or reviewing current equipment for suitability of the end user (especially for things like sizing of clothing) but is totally irrelevant to buying (sometimes literal) nuts and bolts. This particular one is a form that has to get filled out every single time and added as part of the procurement documentation, where you could avoid it entirely by selectively employing the policy better.

Within ADM(Mat) it's the same people working on projects that are also doing in service support, and managing NP projects is far more LOE intensive than capitol projects due to the differences in how the finances work.

Seen. But I have also sat through civvies arguing about whether to accept the Technical Director's preferred supplier or that of the QA Director who has the support of the Technical Director's youthful, ambitious Western manager.

And that supplier argument does get us into the weeds of Chinese or Swedish, EPDM or NBR, on demand or in bulk for inventory.

I'm not discounting your frustrations at all. Far from it. Just saying that the civvy world doesn't provide any different environment. And, in my opinion that makes some civvies worthwhile considering for their skills that might be applicable in the military world - beyond their abilities as trigger pullers, or radar repairers or the abilities to read the clouds.

How much of second, third and fourth line work in the CF could be done by civilians are employed as civilians but also required to be Reserves?

Why the Reserve requirement?

1 - to learn the community using the kit, their needs, and learn how to use the kit.
2 - to confront the prospect of being ordered to join the colours and use the kit you just bought.
 
@Kirkhill most of the folks are civilian with military positions as well. I think some may already be reservists filling reg force positions, and we tried that route ourselves but had no takers.

I may not be following what you are getting at though, but was just sharing my personal observations that there are a lot of new inefficiencies added to every day work, as well as larger projects, so takes more time to do something. So when you add on HR shortages, as well as a massive experience loss (we lost about 100 years of collective experience in the last 2 years in a small section due to a few retirements) it means we have a lot less real capacity.

So things take longer because there are more steps and people are learning, and we have less people to do things. I'm sure that results in a lot of direct costs for the workarounds with old broken stuff, as well as indirect cost (even just inflation as buying a widget next year instead of this year will cost more).

Travel is actually another good example, there is so much oversight/approval that it can take 2-4 weeks or more, with a high LOE, so I'm sure between the staff work and late booking costs we spend huge amounts more on travel than if we let managers approve things within their budget.

Not unique to the CAF, or even the GoC, but when the expectation is that we somehow increase the output, it just doesn't actually work. Most places are 1-deep as well, so when someone is on leave, traveling etc we basically just do the best we can, but there are big gaps in expertise/knowledge.

Like a lot of big places, the policy weenies don't talk to the worker bees, but the problem seems to be the MBA types (and 3rd party SMEs) get a lot more visibility, so we seem to be creating a lot of monitoring, dashboard, KPI type things but less actual sausage being made.
 
We should wait until trudeau is out of office before we buy anymore equipment.

He'll give it away before we get the cardboard floormats out of it.
 
  • Humorous
Reactions: ueo
@Kirkhill most of the folks are civilian with military positions as well. I think some may already be reservists filling reg force positions, and we tried that route ourselves but had no takers.

I may not be following what you are getting at though, but was just sharing my personal observations that there are a lot of new inefficiencies added to every day work, as well as larger projects, so takes more time to do something. So when you add on HR shortages, as well as a massive experience loss (we lost about 100 years of collective experience in the last 2 years in a small section due to a few retirements) it means we have a lot less real capacity.

So things take longer because there are more steps and people are learning, and we have less people to do things. I'm sure that results in a lot of direct costs for the workarounds with old broken stuff, as well as indirect cost (even just inflation as buying a widget next year instead of this year will cost more).

Travel is actually another good example, there is so much oversight/approval that it can take 2-4 weeks or more, with a high LOE, so I'm sure between the staff work and late booking costs we spend huge amounts more on travel than if we let managers approve things within their budget.

Not unique to the CAF, or even the GoC, but when the expectation is that we somehow increase the output, it just doesn't actually work. Most places are 1-deep as well, so when someone is on leave, traveling etc we basically just do the best we can, but there are big gaps in expertise/knowledge.

Like a lot of big places, the policy weenies don't talk to the worker bees, but the problem seems to be the MBA types (and 3rd party SMEs) get a lot more visibility, so we seem to be creating a lot of monitoring, dashboard, KPI type things but less actual sausage being made.

Sorry I misunderstood "Pete". I'm hearing you now.

I can see that if you have spent a career in uniform managing contracts that your experiences are not much different than those of a civilian that has spent a career managing contracts.

But perhaps that goes to my point? If you are short of qualified bodies in the procurement field how do you find suitable, military friendly, candidates to fill the gaps?

I agree entirely with your point on MBAs and not talking to the plant floor - and that is a nation wide, if not a First World problem (a real one).

McKInsey et al keep telling the bosses that they can get you to 95% efficiency. And I keep telling whoever will listen that 70% is a much more realistic planning horizon. I don't make what McKinsey makes.
 
Back
Top