• Thanks for stopping by. Logging in to a registered account will remove all generic ads. Please reach out with any questions or concerns.

Occupational and Component Transfers (OT/CT/VOT) During and After BMQ (Merged)

  • Thread starter cameron_highlander
  • Start date
What degree would be best for Infantry?

Would a Journalism degree match with Imagery Tech or would I need more specific training?
 
NCM trades do not require a degree. The BPSO is the best person to recommend what degree might be accepted for an ILP.

If you choose the ROTP route, any degree is suitable for Infantry Officer.
 
Thank you for the information! I will be sure to do that ASAP.

Have a good night. :)
 
I have a question regards of Component Transfers CT, I want to transfer from Army to Air Force, right after I finish my BMQ, I was applied for Air Force Supply Tech but somehow the recruiting center give me an Army Supply Tech offer, I was waited 13 months already and didn't want wait anymore so I  signed Army offer, now I am on the middle of my BMQ. Could any one give me some directive or a link for what to do, any suggestion will be very appreciated, thank you in advance. 
 
hathway said:
I have a question regards of Component Transfers CT, I want to transfer from Army to Air Force, right after I finish my BMQ, I was applied for Air Force Supply Tech but somehow the recruiting center give me an Army Supply Tech offer, I was waited 13 months already and didn't want wait anymore so I  signed Army offer, now I am on the middle of my BMQ.

Sounds like you want an Element change,

Element Transfer
https://army.ca/forums/threads/94747.0

element change 
https://army.ca/forums/threads/92932.0
2 pages.

What element to pick 
https://army.ca/forums/threads/121873.0

Switching "Wrong" Element Wait Time?
https://army.ca/forums/threads/116234.0
2 pages.

etc...

As Supply Tech is a Purple trade, see also,

Purple Trades
https://army.ca/forums/threads/22558.125
11 pages.
 
Res here and looking to switch trades however what would be more useful civi side ? Supply Teck or HRA Clerk

Also how do I do this (is this called a VOT since I only have my basic done )
 
My Apologies If my question sounds stupid but I just wanted to understand the know hows of this. Are soldiers allowed to transfer between trades in the forces ? Like from artillery to Infantry or must you stick with the one you choose at start. After how long can you choose another trade ?
 
Yes, you can apply (request) to change trades (Occupational Transfer).  If you're already trade qualified in a current trade, the time requirements are 36 months of service if you are in a combat arms trade (Infantry, Armoured, Artillery, Combat Engineer) or 48 months of service for all other NCM trades.

You can also request something called a MOC Reassignment if you aren't trade qualified yet and in the training system.

There are some rules, requirements for each of the OT and MOC Reassignment which you'll probably find if you search/read thru this thread.
 
humblesoldier said:
Are soldiers allowed to transfer between trades in the forces ?

See also,

Voluntary Occupational Transfer ( VOT )
https://army.ca/forums/threads/21109.0.html
47 pages.
 
Hey guys,

First, I would like to apologize if this has been posted before. I tried to do some research and looked for previous posts but I stumbled upon nothing. So I have applied to join the Canadian Army since November 2017. At first I was told I was successful for the CFAT but don't have enough score to join as DEO/ Officer. So I applied for the NCM trades. I was told I'd have more chances of getting into Combat Engineer rather then what I want to get into. I have a degree in B.Sc. in Earth Science and Physical Geography. So my background is more towards geomatics and drafting survey fields. I'm really hoping to get into either geomatics or drafting survey but was told I might not be qualified due to my CFAT score. So here's my question, in case I don't get into either the fields I like. What is the likelihood of me switching trades down the road once I join the army? I can see myself having a career with the CAF but most likely in something that I would love doing. Not that I'm saying I can't do combat engineer since I'm always up for new challenges and learn something new. But I just don't want my bachelor degree to go to waste. So I want to know if it would be easy to switch trades down the road. Therefore, I would welcome anybody with any information, and anyone who could give me some advice. I would really appreciate it.

Please and thank you.
 
jdem007 said:
What is the likelihood of me switching trades down the road once I join the army?

See also,

Occupational and Component Transfers (OT/CT/VOT) During and After BMQ (Merged)
https://army.ca/forums/threads/23075.0.html
8 pages.

Voluntary Occupational Transfer ( VOT )
https://army.ca/forums/threads/21109.0.html
47 pages.

MOC Reassignment
https://www.google.com/search?rls=com.microsoft%3Aen-CA%3AIE-Address&rlz=1I7GGHP_en-GBCA592&ei=DDVoXbCXOqiw_QaL3JXADQ&q=site%3Aarmy.ca+MOC+Reassignment&oq=site%3Aarmy.ca+MOC+Reassignment&gs_l=psy-ab.12...0.0..29685...0.0..0.0.0.......0......gws-wiz.8W0QFsFH4kk&ved=0ahUKEwiwzfOb9ajkAhUoWN8KHQtuBdgQ4dUDCAo#spf=1567110444713




 
jdem007 said:
Hey guys,

First, I would like to apologize if this has been posted before. I tried to do some research and looked for previous posts but I stumbled upon nothing. So I have applied to join the Canadian Army since November 2017. At first I was told I was successful for the CFAT but don't have enough score to join as DEO/ Officer. So I applied for the NCM trades. I was told I'd have more chances of getting into Combat Engineer rather then what I want to get into. I have a degree in B.Sc. in Earth Science and Physical Geography. So my background is more towards geomatics and drafting survey fields. I'm really hoping to get into either geomatics or drafting survey but was told I might not be qualified due to my CFAT score. So here's my question, in case I don't get into either the fields I like. What is the likelihood of me switching trades down the road once I join the army? I can see myself having a career with the CAF but most likely in something that I would love doing. Not that I'm saying I can't do combat engineer since I'm always up for new challenges and learn something new. But I just don't want my bachelor degree to go to waste. So I want to know if it would be easy to switch trades down the road. Therefore, I would welcome anybody with any information, and anyone who could give me some advice. I would really appreciate it.

Please and thank you.

My question at this point;  have you considered rewriting the CFAT after some 'prep' for it?  That might open up the DEO route and/or the Geo Tech and Drafting & Surveying Tech trades. 

And here's the big reason I ask about rewriting your CFAT after some prep;  to do an Occupational Transfer into a different trade if you are in the Forces already, you must have passed the CFAT levels for that trade. 

Rewriting CFAT is a must at this point if you want to go DEO, Geo Tech or Drafting/Survey Tech at any point.  Personally, I say the effort is worth it;  I had to rewrite my CFAT as the trade I wanted to OT into didn't exist when I joined the CAF.  I basically brushed up on some math, with a focus on fractions, and I was successful.  The effort of a few weeks has paid off for years now and will pay off until I retire from the Forces.

 
Hey guys,

Thank you @mariomike for your reply. I will definitely check those links.

Hello @ Eye In The Sky. Thanks for your reply!

I really want to rewrite the CFAT if that is what it would take, I'm just not sure if it is possible though as I had already written the CFAT twice. I was told it's futile to have a third go at it. Both time I wrote the CFAT I don't think I had prepared properly. But I'm willing to work and study hard if I could write it again. Another thing I should mention, my file just got transferred from Ottawa to Edmonton and now I'm waiting to get an email regarding the interview. It took a while for my medical to get approved ( my fault though) but I'm not sure how long it is going to take to get an interview. When I updated my file after my file expired, I was told I could add Geo Tech or Drafting/Survey Tech as my choices since they have them opened but during the interview I would be advised I fit to these categories or not. So I was wondering should I ask to rewrite the CFAT now? if I could rewrite it a third time. I just don't want this to keep dragging and I really want to join the CAF. Any advice is appreciated.

Thank you!
 
jdem007 said:
Thank you @mariomike for your reply.

You are welcome. Good luck.  :)

jdem007 said:
I really want to rewrite the CFAT if that is what it would take, I'm just not sure if it is possible though as I had already written the CFAT twice.

For reference to the discussion,

I have a quick question about doing a re-write
https://army.ca/forums/threads/109185.0

CFAT Rewrite 
https://army.ca/forums/threads/107773.0

CFAT Re-write
https://www.google.com/search?sxsrf=ACYBGNStShvfT3emySLRzD4VTcZeZC5FYw%3A1567715048735&source=hp&ei=6G5xXeuoKoPQ0PEP25KX8AQ&q=site%3Aarmy.ca+re+write&oq=si&gs_l=psy-ab.1.1.35i39l2j0i67j0j0i131l2j0l3j0i131.1498.1822..4020...0.0..0.230.433.2-2......0....1..gws-wiz.Pg4nHoieqCQ#spf=1567715052808

As you are an applicant, Recruiting is your most trusted source of official up to date information.

"Unofficial site, not associated with DND or the Canadian Armed Forces."

 
Hey y’all,


I’m going through my reserve weekend BMQ as a cook and I’ve recently had a change of heart…

I want to remain in the service battalion but I would like to trade transfer to vehicle tech.

I’m planning to put in a occupational transfer request at my service battalion after my BMQ.


Would this be a hard thing to do ? I’ve been told that people transfer trades all the time with no challenges.
And would that mean I have to write the CFAT all over again?
 
Back
Top