• Thanks for stopping by. Logging in to a registered account will remove all generic ads. Please reach out with any questions or concerns.

"man" lift designation

PiperDown

Member
Donor
Reaction score
0
Points
210
Does anyone know of a reference which indicates what a "man lift" entails.  For example, a 100lb hardigg case could be a 2 man lift.

 
PiperDown said:
Does anyone know of a reference which indicates what a "man lift" entails.  For example, a 100lb hardigg case could be a 2 man lift.

SOPs, warnings on the piece of equipment, direction from higher, common sense?

In my experience, depending on the shape, size, and akwardness of the item, coupled with the abilities of your personnel (not everyone is a He-Man or She-ra) situation dictates.
 
My question was answered via other means, however I will post the answer here.  My take...is an item 20kg or less is considered a " 1 man lift ", over 20kg is a "2 man lift "

http://vcds.mil.ca/dsafeg/polpgms/manuals/GSStandards/00native/040009-AG-001-Ch16_e.pdf

10.43.3 No department shall require an employee whose primary tasks do not include manual
lifting or carrying to manually lift or carry materials, goods or things in excess of 20 kg.

10.43.4 Where an employee is required to lift or carry loads in excess of 10 kg manually,
departments shall instruct and train the employee:
(a) in a safe method of lifting and carrying the loads that will minimize the stress on
the body; and
(b) in a work procedure appropriate to the employee's physical condition and working
conditions.


It also makes reference to 45 kg, but specific rules apply.

10.43.6 Where an employee is required to lift or carry loads in excess of 45 kg manually or
where the employee is required to lift or carry persons, the instructions given to the employee in
accordance with 10.43.4 and 10.43.5 shall be:
(a) set out in writing;
(b) readily available to the employee to whom they apply;
(c) kept by departments for a period of two years after they cease to apply; and
(d) reviewed annually with the employee.
 
Towards_the_gap said:
Pure curiousity compels me to ask, why do you need to know this?

for a rapid deployable communications suite.  The kit needs to be a specific size based on "man transportable" measurements.  If its too heavy, we will take stuff out, or find a replacement. The CONOPS must be very specific.
 
I see.

Bear in mind that the document you refer to states that it doesn't apply to the CF operationally. In which case common sense and rule of thumb (1/3 the weight of the average human is what they can efficiently carry for long periods) will dictate what is a 1 man or 2 man lift.
 
PiperDown said:
for a rapid deployable communications suite.  The kit needs to be a specific size based on "man transportable" measurements.  If its too heavy, we will take stuff out, or find a replacement. The CONOPS must be very specific.

"Man transportable" as in a four man det plus security lugs everything 8k into the bush?

Or as in a QRT where your kit might be dropped off on the side of the road and you hoof it a couple hundred meteres in a series of two-man lifts a case at a time?
 
" man transportable " like take a couple guys dressed in civies on a civie flight with a backpack, or hardigg/ pelican case or suitcase.

 
Back
Top