• Thanks for stopping by. Logging in to a registered account will remove all generic ads. Please reach out with any questions or concerns.

RCN Carrier models

A minor Bonnie update....
 

Attachments

  • 494921964_10160469416352242_8696479720232630263_n.jpg
    494921964_10160469416352242_8696479720232630263_n.jpg
    491.7 KB · Views: 30
  • 495032639_10160469415977242_8585186367578951141_n.jpg
    495032639_10160469415977242_8585186367578951141_n.jpg
    639.8 KB · Views: 30
  • 495119525_10160469415752242_4105155422718571805_n.jpg
    495119525_10160469415752242_4105155422718571805_n.jpg
    1,013 KB · Views: 30
I see in the first picture that you are using AI as plane handlers. ;)

Nice touch with the 35B, but we know the RCAF would never allow the RCN to have its Air Arm again.
If there is ever an air strike conducted at either of our two naval base my first question will be what did the Navy do to offend the RCAF ?😉
 
I've cleared my building slips of other models for now, and have been puttering away at getting my model of HMS Puncher finished up. There's honestly not a lot left to do with her - she's almost ready to launch. I did the tie-down lines this afternoon on the flight deck, and the rudder/motor mount were installed earlier in the week.
 

Attachments

  • Puncher Motor Mount.jpg
    Puncher Motor Mount.jpg
    516.6 KB · Views: 14
  • Puncher Rudder.jpg
    Puncher Rudder.jpg
    515.5 KB · Views: 15
  • Puncher at Hobby Show.jpg
    Puncher at Hobby Show.jpg
    894.5 KB · Views: 14
  • Flight Deck 1.jpg
    Flight Deck 1.jpg
    572.5 KB · Views: 11
  • Flight Deck.jpg
    Flight Deck.jpg
    295.1 KB · Views: 12
  • Flight Deck 6.jpg
    Flight Deck 6.jpg
    490.2 KB · Views: 12
  • Flight Deck 7.jpg
    Flight Deck 7.jpg
    413.9 KB · Views: 13
HMS Puncher has sailed - she's done her maiden voyage, and is now very close to being complete.


In terms of what's left to do, here's my list of bits/things that remain:

20mm guns paint/install
40mm guns paint/install
Barracuda decals
Barracuda wings glued on
Barracuda Clear coat seal
Hull markings (D79 + waterline mark + depth lines)
Flags? Might want to add some signal flags too

A few photos of the rigging and guard-rail details that I added last night are attached below.
 

Attachments

  • PuncherRiggingstarted.thumb.jpg.26ee366a97fbf262fbf3877ded4e3c54.jpg
    PuncherRiggingstarted.thumb.jpg.26ee366a97fbf262fbf3877ded4e3c54.jpg
    77.3 KB · Views: 2
  • PuncherRigging.thumb.jpg.81c5fa44789646811d2a6e55aba212f3.jpg
    PuncherRigging.thumb.jpg.81c5fa44789646811d2a6e55aba212f3.jpg
    101 KB · Views: 2
  • PuncherLSOandMartlets.thumb.jpg.c8f735f3a3f494cf9f13af99d4489b98.jpg
    PuncherLSOandMartlets.thumb.jpg.c8f735f3a3f494cf9f13af99d4489b98.jpg
    144.1 KB · Views: 2
  • PuncherIslandandMartlet.thumb.jpg.cdfdb243aa6b86d4ce26629c7baacf70.jpg
    PuncherIslandandMartlet.thumb.jpg.cdfdb243aa6b86d4ce26629c7baacf70.jpg
    128.4 KB · Views: 2
  • Puncherboardingladders.thumb.jpg.832678a1f75bdabd0ac3e55726b85cda.jpg
    Puncherboardingladders.thumb.jpg.832678a1f75bdabd0ac3e55726b85cda.jpg
    128.6 KB · Views: 2
  • PuncherDetailes.thumb.jpg.32e2526bc902361708f018583d848a00.jpg
    PuncherDetailes.thumb.jpg.32e2526bc902361708f018583d848a00.jpg
    159.9 KB · Views: 2
Back
Top